Before beginning the installation process, measure the upper strut mount height as shown in image 1
You will need to remember this number for later in the install
I had the eibach front and rear sways and eibach lowering springs put in
Wondering, does anyone make a camber adjust kit that can be installed
(i think that is the one that is not adjustable?)
Mookeeh caster camber plates for kia stinger #mookeeh #kiastinger mookeeh 166 subscribers subscribe
You'll need an alignment and some parts for the rear
If your coilovers have camber plates in the front they can be adjusted but if not you're out of.
The top bolts on the strut plate are designed to be used only once, distorting as they’re tightened, so you’ll need six of these for the front, and four more for the rear.
The most common way to gain.
We strongly recommended that a qualified technician install these components as serious injury or even death can occur during installation
We further advise that the directions be read in their entirety.
Remove and discard the factory upper strut mount, but leave the rubber spring isolator on the spring
Assemble the caster camber plate as shown in image 3 be sure to line up the notches cut in the front.
Anyone running a caster/camber plate?
They make rear adjustable camber arms but not the front
The only way to get the front camber adjustment is to go with coilovers with camber adjustable hats.
Yes negative camber front and rear car is alignmented properly drives amazing definitely happy with it lowered
Is a little harder to get out off
And have to be super careful not to pull to far.
In this article, we’ll go.
In this video i explain how to install and use camber adjustment bolts
These bolts are universal and fit dozens of different makes/models
I just came back from getting new tires and an alignment on my stinger
So, it seems that you cannot adjust camber in the front
My camber is off in the two front wheels and there is no way to.